Alloy 400

Print

AVAILABILITY

Seamless Pipe 1/2" - 8"
Pressure Fittings 1/2" - 2"
Weld Pipe 8" - 12"
150# Fittings 1/4" - 1"
Butt-Weld Fittings 1/2" - 8"
Tubing 1/4", 3/8", 1/2"
Flanges 1/2" - 8"
Valves 1/2" - 8"

SPECIFICATIONS

ASTM B131, B164, B366
ASME SB131, SB164, SB366

CHEMICAL COMPOSITION %

DESCRIPTION

Alloy 400 is used for its excellent combination of corrosion resistance, strength, ductility and weldability. The corrosion resistance in seawater is especially good under high velocity conditions. Alloy 400 also is generally not susceptible to stress corrosion cracking.

DESIGN FEATURES

• Outstanding resistance to neutral and alkaline salt.
• One of few metallic materials which can be used in contact with fluorine, hydrofluoric acid, hydrogen fluoride and their derivatives.
• High resistance to caustic alkalis.
• Can be used in contact with dilute solutions of mineral acids such as sulfuric and hydrochloric, particularly if they are non-aerated.
• Resistance to chloride induced stress corrosion cracking.
• Good mechanical properties from sub-zero temperatures up to 1020oF.

TYPICAL APPLICATIONS

• Feed-water and steam generator tubing in power plants
• Brine heaters and evaporator bodies in salt plant
• Sulfuric and hydrofluoric acid alkylation plant
• Industrial heat exchangers
• Cladding for crude oil distillation columns
• Splash-zone sheathing in offshore structures
• Propeller and pump shafts for seawater service
• Plant for uranium refining and isotope separation in the production of nuclear fuel
• Pumps and valves used in the manufacture of chlorinated hydrocarbons
• Monoethanolamine (MEA) reboiler tubes

TENSILE REQUIREMENTS

KSI can be converted to MPA (Megapascals) by multiplying by 6.895.